VIEWING 2 DIFFERENT CHANNEL IN SERVER AND CLIENT
 

SETTING PC CLIENT

Install PROGDVB in PC CLIENT selecting, at begin from the device list , "Prog Media CLIENT"
 

Continue setup normally.
Before starting ProgDVB perform this operation:
- from the PC SERVER copy \CHANNELS folder contained in.. \ Progdvb\Channels in the Progdvb folder on CLIENT computer, so you have same channels list on SERVER and CLIENT (if necessary "overwrite" existing files).
Copy your language file too.
Open ProgDVB, set language, and in SETTINGS/ DEVICE LIST you should be active "PROG Media CLIENT: Mpeg2 or mpa stream" with a green card icon

Select instead "PROG MEDIA CLIENT: Transport Stream" and clickc on Start button.
After some second the icon card become green.

Now click on PROPRIETY.

Do not change the PORT values, set only the IP number of SERVER PC to 192.168.0.1

Confirm with OK. Is also possible import Channels List following another way.
Press again PROPERTY and click GET CHANNEL LIST in dialogue box

At the end you will find same Channels List of SERVER (in certain cases import process could result extremely slow, be patient!). Will be imported active list only, therefore, if you have more channels lists or "Favorites" you lose it. For this reason we recommend you to copy manually. 

If settings are correct you should see same channel of SERVER. It's possible change channel both from SERVER and CLIENT.  
Now it's possible change on channel SERVER different from CLIENT.

< MENU'