GUIDA: configurare TIVUSAT e il lettore INFINITY USB SMART

[Gravanar]

Prima pagina cercando "tiger rsa key tivusat" ho trovato almeno due link corretti, (tra l'altro in italiano) l'ideakey non serve.

[modchip]

ho qusto log:

>> OSCam << cardserver started at Tue Oct 26 18:43:10 2010
-------------------------------------------------------------------------------
2010/10/26 18:43:10 5172 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-1
2010/10/26 18:43:10 5172 s max. clients=509, client max. idle=120 sec
2010/10/26 18:43:10 5172 s max. logsize=1000 Kb
2010/10/26 18:43:10 5172 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/10/26 18:43:10 5172 s shared memory initialized (size=4302198, fd=3)
2010/10/26 18:43:10 5172 s auth size=4756
2010/10/26 18:43:10 5172 s services reloaded: 0 services freed, 1 services loaded
2010/10/26 18:43:10 5172 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/10/26 18:43:10 5172 s signal handling initialized (type=sysv)
2010/10/26 18:43:10 5172 s 31 service-id's loaded
2010/10/26 18:43:10 5172 s 352 provid's loaded
2010/10/26 18:43:10 5172 s Cannot open oscam.version (errno=2)
2010/10/26 18:43:10 5172 s monitor: disabled
2010/10/26 18:43:10 5172 s camd 3.3x: disabled
2010/10/26 18:43:10 5172 s camd 3.5x: initialized (fd=7, port=20000)
2010/10/26 18:43:10 5172 s cs378x: disabled
2010/10/26 18:43:10 5172 s newcamd: initialized (fd=8, port=34001, crypted)
2010/10/26 18:43:10 5172 s CAID: 183D
2010/10/26 18:43:10 5172 s provid #0: 000000
2010/10/26 18:43:10 5172 s cccam: disabled
2010/10/26 18:43:10 5172 s radegast: disabled
2010/10/26 18:43:10 5172 s logger started (pid=10872)
2010/10/26 18:43:10 5172 s resolver thread started
2010/10/26 18:43:10 5172 s http started (pid=5828)
2010/10/26 18:43:10 5828 h HTTP Server listening on port 8189
2010/10/26 18:43:10 5172 s reader started (pid=11176, device=/dev/ttyS2, detect=ring, mhz=357, cardmhz=357)
2010/10/26 18:43:10 5172 s waiting for local card init
2010/10/26 18:43:13 11176 r02 card detected
2010/10/26 18:43:18 11176 r02 ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2010/10/26 18:43:19 11176 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/10/26 18:43:20 11176 r02 detect nagra tiger card
2010/10/26 18:43:23 11176 r02 card system not supported
2010/10/26 18:43:23 11176 r02 Normal mode failed, reverting to Deprecated Mode
2010/10/26 18:43:27 11176 r02 ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2010/10/26 18:43:28 11176 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/10/26 18:43:29 11176 r02 detect nagra tiger card
2010/10/26 18:43:36 11176 r02 card system not supported
2010/10/26 18:43:36 11176 r02 card initializing error
2010/10/26 18:43:36 5172 s init for all local cards done
2010/10/26 18:43:36 5172 s anti cascading disabled
-------------------------------------------------------------------------------
>> OSCam << disconnected

cosa è che non va?
Ah ho win7 ultimate 64bit

[Gravanar]

Dificile dirlo con i dati che abbiamo, che lettore utilizzi? Posta i tuoi file di configurazione di oscam omettendo chiavi e dati sensibili e vediamo se qualcuno riesce ad aiutarti

[modchip]

il lettore è questo:

SmartUSBee 3,579Mhz Duolabs smartbee USB

per il resto la configurazio è quella standard postata qui

[Gravanar]

Non lo conosco, ci possono essere problemi con i lettori usb, anche se con protocollo mouse dovrebbero andare tutti. La chiave l'hai inserita tutta attaccata?

[modchip]

vistoc he il lettore ha solo la porta USB quale è la dicituta corretta in oscam per le porte USB?

[fenomeno83]

io non riesco a far funzionare mediaset premium..la cosa comica è che la prima volta che ho configurato il sistema funzionava tutto..dopo qualche minuto non ha funzionato più nulla e rifacendo la stessa configurazione non riesco a farlo funzionare

ho il lettore usb infinity smart

Ecco i miei file:

oscam.conf

[global]
Nice =-20
WaitForCards =1
LogFile =oscam.log
maxlogsize = 1000

[newcamd]
key =0102030405060708091011121314
port =34001@1805:000000


oscam.server

[reader]
label =INFINITY
enable = 1
protocol =mouse
device =/dev/ttyS24
services =
fallback = 1
caid =1805
tiger_rsakey = A92.......B5
detect =CD
mhz = 368
cardmhz = 368
ident = 1805:000000
group =1

oscam.user

[account]
user=scaistar
pwd=scaistar
monlevel = 0
group=1
caid=1805
ident=1805:000000
uniq=1
au=1


acamd

newcamd:localhost:34001:1/1805/FFFF:scaistar:scaistar:0102030405060708091011121314

avviando il loader mi dà l'errore "not found"...non funziona neanche avviando direttamente oscamserver

acamd mi dice
Newcamd0: ecm[0a27][1805/00000000] Pro (0.xxx)
Newcamd0: ecm[0a27][1805/00000000] not able to decode

da notare che nei file, nell'ident è messo 1805:000000
seguendo una guida avevo messo 1805:008d11
e funzionavano entrambi..ORA NON FUNZIONA PIU' NIENTE!!!

Sto provando a fare l'attivazione dal sito e a mettere per un'oretta la tessera su premium menù..ma la vedo nera e non so come muovermi

ho windows 7

[fenomeno83]

il log


>> OSCam << cardserver started at Sat Jan 8 15:19:07 2011
-------------------------------------------------------------------------------
2011/01/08 15:19:07 6180 s version=0.99.4svn, build #2532, system=i386-pc-cygwin, nice=-20
2011/01/08 15:19:07 6180 s max. clients=509, client max. idle=120 sec
2011/01/08 15:19:07 6180 s max. logsize=1000 Kb
2011/01/08 15:19:07 6180 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/01/08 15:19:07 6180 s shared memory initialized (size=4302198, fd=3)
2011/01/08 15:19:07 6180 s auth size=4756
2011/01/08 15:19:07 6180 s services reloaded: 0 services freed, 1 services loaded
2011/01/08 15:19:07 6180 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/01/08 15:19:07 6180 s signal handling initialized (type=sysv)
2011/01/08 15:19:07 6180 s 31 service-id's loaded
2011/01/08 15:19:07 6180 s 352 provid's loaded
2011/01/08 15:19:07 6180 s Cannot open oscam.version (errno=2)
2011/01/08 15:19:07 6180 s monitor: disabled
2011/01/08 15:19:07 6180 s camd 3.3x: disabled
2011/01/08 15:19:07 6180 s camd 3.5x: initialized (fd=7, port=20000)
2011/01/08 15:19:07 6180 s cs378x: disabled
2011/01/08 15:19:07 6180 s newcamd: initialized (fd=8, port=34001, crypted)
2011/01/08 15:19:07 6180 s CAID: 1805
2011/01/08 15:19:07 6180 s provid #0: 008D11
2011/01/08 15:19:07 6180 s cccam: disabled
2011/01/08 15:19:07 6180 s radegast: disabled
2011/01/08 15:19:07 6180 s logger started (pid=7584)
2011/01/08 15:19:07 6180 s resolver thread started
2011/01/08 15:19:07 6180 s http started (pid=8996)
2011/01/08 15:19:07 6180 s reader started (pid=7736, device=/dev/ttyS31, detect=cd, mhz=358, cardmhz=368)
2011/01/08 15:19:07 6180 s waiting for local card init
2011/01/08 15:19:07 8996 h HTTP Server listening on port 8189
2011/01/08 15:19:10 6180 s init for all local cards done
2011/01/08 15:19:10 6180 s anti cascading disabled
2011/01/08 15:19:10 7736 r02 card detected
2011/01/08 15:19:14 7736 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 31 16
2011/01/08 15:19:16 7736 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.58 Mhz
2011/01/08 15:19:17 7736 r02 detect nagra tiger card
2011/01/08 15:19:18 7736 r02 type: NAGRA, caid: 1805, IRD ID: FE 71 2B 49
2011/01/08 15:19:18 7736 r02 ProviderID: 00 00 8D 11
2011/01/08 15:19:18 7736 r02 ROM: N C M E D 6 0 1
2011/01/08 15:19:18 7736 r02 REV: R e v M 0 1
2011/01/08 15:19:18 7736 r02 SER: 7C D2 AE 63
2011/01/08 15:19:18 7736 r02 CAID: 1805
2011/01/08 15:19:18 7736 r02 Prv.ID: 00 00 8D 11 (sysid)
2011/01/08 15:19:18 7736 r02 [nagra-reader] ready for requests
2011/01/08 15:19:42 6180 s client(1) connect from 127.0.0.1 (pid=4556, pipfd=14)
2011/01/08 15:19:42 4556 c01 encrypted newcamd:34001-client 127.0.0.1 granted (scaistar, au(auto)=infinity)
2011/01/08 15:19:42 4556 c01 user scaistar authenticated successfully (ACamd)
2011/01/08 15:19:42 4556 c01 AU enabled for user scaistar on reader infinity
2011/01/08 15:19:42 4556 c01 scaistar (1805&008D11/0065/91:979D): not found (380 ms)
2011/01/08 15:19:45 4556 c01 scaistar (1805&008D11/0065/91:979D): not found (2150 ms)
2011/01/08 15:19:47 4556 c01 scaistar (1805&008D11/0065/91:E2B5): not found (741 ms)
2011/01/08 15:19:57 4556 c01 scaistar (1805&008D11/0065/91:B431): not found (730 ms)
2011/01/08 15:20:07 4556 c01 scaistar (1805&008D11/0065/91:0368): not found (731 ms)
2011/01/08 15:20:17 4556 c01 scaistar (1805&008D11/0065/91:4CE1): not found (670 ms)
2011/01/08 15:20:27 4556 c01 scaistar (1805&008D11/0065/91:4ED0): not found (710 ms)

[fenomeno83]

mi sono configurato un server virtuale linux..il modulo + sempre il betaId=25 a 3.58...
ho preso oscam svn4324ubuntu1010webif

niente da fare..
!
2011/01/08 10:33:42 B77CFB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/01/08 10:33:43 B77CFB70 r detect nagra tiger card
2011/01/08 10:33:43 B77CFB70 r type: NAGRA, caid: 1805, IRD ID: FE 71 2B 49
2011/01/08 10:33:43 B77CFB70 r ProviderID: 00 00 8D 11
2011/01/08 10:33:43 B77CFB70 r WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2011/01/08 10:33:43 B77CFB70 r found cardsystem
2011/01/08 10:33:43 B77CFB70 r ROM: N C M E D 6 0 1
2011/01/08 10:33:43 B77CFB70 r REV: R e v M 0 1
2011/01/08 10:33:43 B77CFB70 r SER: 7C D2 AE 63
2011/01/08 10:33:43 B77CFB70 r CAID: 1805
2011/01/08 10:33:43 B77CFB70 r Prv.ID: 00 00 8D 11 (sysid)
2011/01/08 10:33:43 B77CFB70 r Activation Date : 01/01/2009
2011/01/08 10:33:43 B77CFB70 r Expiry Date : 31/12/2099
2011/01/08 10:33:43 B77CFB70 r [nagra-reader] ready for requests
2011/01/08 10:34:02 B6FC7280 c client connected to 34001 port
2011/01/08 10:34:02 B6FC7280 c encrypted newcamd:34001-client 192.168.17.1 granted (scaistar, au(auto)=infinity)
2011/01/08 10:34:02 B6FC7280 c user scaistar authenticated successfully (ACamd)
2011/01/08 10:34:02 B6FC7280 c AU enabled for user scaistar on reader infinity
2011/01/08 10:34:03 B6FC7280 c scaistar (1805&000000/0065/91:BCBC): not found (352 ms) (of 0 avail 0)
2011/01/08 10:34:08 B6FC7280 c scaistar (1805&000000/0065/91:BCBC): timeout (5008 ms) (of 0 avail 0)
2011/01/08 10:34:11 B6FC7280 c scaistar (1805&000000/0065/91:4562): not found (355 ms) (of 0 avail 0)

[massie]

Con le ultime versioni di oscam il parametro tiger_rsakey = è diventato solo rsakey =
Quindi va aggiornato oscam.server

[lionard]

A me si blocca il pc completamente (windows xp) , ho provato anche a cambiare impostazioni e prima l'antivirus mi rileva oscam come virus e se dico procedi si blocca nuovamente il pc (e devo riavviarlo dal pulsante frontale).
Come posso impostare os cam, questo è il mio smartmouse phoenix collegato nella com 1.
Prima di distruggere il pc qualcuno mi sa aiutare? Grazie

[scaistar]

in oscam.conf prova a mettere
Nice =-1

[emy1962]

Grazie a questa guida semplice ho risolto i problemi ^_^
ci ho messo un po a trovarla ma poi in 10 minuti ho risolto grazie all'autore della guida b giornata

emy

[henryxp]

Viste la grande richiesta ho deciso di pubblicare una DOWNLOAD OSCAM LOADER 1.4 + OSCAM 0.99.4

Non va il download, mi puoi spedire i file a questa mail?: mig29@email.it

Ciao.

[er_m_ac]

Non si riesce a scaricare qualcuno ha qualche link alternativo