Configurazione CCCam del file cardclient.conf su progDVB 6
Inviato: gio feb 25, 2010 10:42 amSalve gente, come da titolo vorrei un aiuto nella configurazione del file cardclient.conf
Ho la C-line ma non sò precisamente dove inserirla. Il file cardclient.conf standard è così composto:
Sapete indicarmi dove inserire la C-line con rispettiva user e passw?
Ho la C-line ma non sò precisamente dove inserirla. Il file cardclient.conf standard è così composto:
- Codice: Seleziona tutto
#
# Comment lines can start with # or ;
#
# every client line starts with the client name, followed by some arguments:
# 'config' (optional) is number between 1-999 to combine with filtering
# 'hostname' is the name of the server
# 'port' is the port on the server
# 'emm' is a flag to allow EMM transfers to the server
# (0=disabled 1=enabled)
# 'caid' (optional) caid on which this client should work
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow
# anything between 1700 & 17FF.
# Default is no filter 0000 & 0000. If only caid is given mask is FFFF.
# You may give multiple caid/mask values comma separated
# (e.g. 1702,1722,0d0c/ff00).
# 'username' is the login username
# 'password' is the login password
#
# newcamd client
# 'cfgkey' is the config key (28bytes)
#
# newcamd client
# 'providerid(s)' add provider id's for filtering 0000006A,0000006D
#
# newcamd2 client whith Chameleon support
# 'providerid(s)' add provider id's for filtering 0000006A,0000006D
#
# cccamn client
# 'softcam' (0=disabled 1=enabled) default 1=enabled
# 'maxhops' (0-999) default 5 hops
#
# radegast client
# No EMM support
#
# gbox client
# UDP localhost only, default ports, No EMM support
#
# gboxn client
# servername, serverport, emm, [caid/mask], serverpassword, pcname, pcport, pcpassword, free text
#
# camd35 client
# UDP protocol
#
#radegast:192.168.7.54:10001:0/0000/0000
#gbox:0.0.0.0:0:0/0000/0000
#camd35:192.168.7.54:24110:1/0000/0000:username:password
#newcamd:192.168.7.54:34000:1/0000/0000:username:password:0102030405060708091011121314
#newcamd:192.168.7.54:34001:1/0100/ff00:username:password:0102030405060708091011121314:0000006A
#newcamd2:192.168.7.54:34000:1/0000/0000:username:password:0102030405060708091011121314
#newcamd2:99:192.168.7.54:34000:1/0000/0000:username:password:0102030405060708091011121314: new newcamd2 engine and attach to config 99
#emubox03:192.168.7.54:10000:0/0000/0000
#gboxn:192.168.7.54:6600:0/0000/0000:AA34BB78:192.168.7.53:6601:AA34BB71:Server 1
#cccamn:192.168.7.54:12000:0/0000/0000:username:password
#cccamn:192.168.7.54:12000:0/0000/0000:username:password:0:Disable soft
#cccamn:192.168.7.54:12000:0/0000/0000:username:password:0:2:Disable soft and max 3 hops
Sapete indicarmi dove inserire la C-line con rispettiva user e passw?