Non mi funzionano alcuni canali Sky :\

[barbatrukko]

Salve a tutti.
Sto cercando di utilizare il loader 1.4.0

Ho una configurazione abbastanza normale:

Windows7 (ma volendo dispongo anche di XP)
SkyStar HD 2
Infinity Smart usb
ProgDVB

ho seguito i vostri suggerimenti e sono arrivato a far "quasi" funzionare il tutto ma ancora manca qualcosa..... in particolare

ecco il log di oscam
-------------------------------------------------------------------------------

>> OSCam << cardserver started at Sun Jan 10 18:46:58 2010

-------------------------------------------------------------------------------

2010/01/10 18:46:58 4892 s version=0.99.4svn, build #716, system=i386-pc-cygwin, nice=-20
2010/01/10 18:46:58 4892 s max. clients=509, client max. idle=120 sec
2010/01/10 18:46:58 4892 s max. logsize=unlimited
2010/01/10 18:46:58 4892 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/01/10 18:46:58 4892 s shared memory initialized (size=4151980, fd=3)
2010/01/10 18:46:58 4892 s auth size=4736
2010/01/10 18:46:58 4892 s Cannot open file "./oscam.services" (errno=2)
2010/01/10 18:46:58 4892 s userdb reloaded: 0 accounts freed, 1 accounts loaded
2010/01/10 18:46:58 4892 s signal handling initialized (type=sysv)
2010/01/10 18:46:58 4892 s can't open file "./oscam.srvid" (err=2), no service-id's loaded
2010/01/10 18:46:58 4892 s monitor: disabled
2010/01/10 18:46:58 4892 s camd 3.3x: disabled
2010/01/10 18:46:58 4892 s camd 3.5x: disabled
2010/01/10 18:46:58 4892 s cs378x: disabled
2010/01/10 18:46:58 4892 s newcamd: initialized (fd=7, port=34500, crypted)
2010/01/10 18:46:58 4892 s CAID: 0919
2010/01/10 18:46:58 4892 s provid #0: 000000
2010/01/10 18:46:58 4892 s radegast: disabled
2010/01/10 18:46:58 4892 s resolver thread started
2010/01/10 18:46:58 4892 s logger started (pid=4412)
2010/01/10 18:46:58 4892 s resolver started (pid=2940, delay=30 sec)
2010/01/10 18:46:58 4892 s reader started (pid=5684, device=/dev/ttyS1, detect=ring, mhz=357, cardmhz=357)
2010/01/10 18:46:58 4892 s Waiting for local card init ....
2010/01/10 18:47:01 5684 r02 card detected
2010/01/10 18:47:05 5684 r02 ATR: 3F FF 13 25 03 11 07 05 99 B1 05 D1 69 FF 4B 05 01 71 05 01 49 55 05
2010/01/10 18:47:08 5684 r02 card system not supported
2010/01/10 18:47:08 5684 r02 card initializing error
2010/01/10 18:47:08 4892 s Init for all local cards done !
2010/01/10 18:47:08 4892 s anti cascading disabled
2010/01/10 18:48:03 4892 s client(1) connect from 127.0.0.1 (pid=7588, pipfd=12)
2010/01/10 18:48:04 7588 c01 encrypted newcamd:34500-client 127.0.0.1 granted (pippo, au=skyit)
2010/01/10 18:48:04 7588 c01 user pippo authenticated successfully (using client 9911)
2010/01/10 18:48:04 7588 c01 AU wont be used on this port -> disable AU
2010/01/10 18:48:06 7588 c01 pippo (0919&000000/1FBA/8E:F25A): not found (5 ms)
2010/01/10 18:48:15 7588 c01 pippo (0919&000000/1FBA/8E:09DD): not found (10 ms)
2010/01/10 18:48:26 7588 c01 pippo (0919&000000/1FBA/8E:7124): not found (4 ms)
2010/01/10 18:48:35 7588 c01 pippo (0919&000000/1FBA/8E:812F): not found (12 ms)
2010/01/10 18:48:45 7588 c01 pippo (0919&000000/1FBA/8E:24FB): not found (10 ms)
2010/01/10 18:48:55 7588 c01 pippo (0919&000000/1FBA/8E:66E0): not found (11 ms)
2010/01/10 18:49:05 7588 c01 pippo (0919&000000/1FBA/8E:34EE): not found (10 ms)

(con altre configurazioni ottenevo spesso r02 Error activating card: -10

ed il log di acamd

18:53:08.840: **** Activate ****
18:53:08.840:
18:53:08.840: Ch: 272 - Fox
18:53:08.840: Programm crc: 15CCA743
18:53:08.841: PMT: ACamd_PMT.txt, search, not found PMT=0110 (AND SID=1FBA)
18:53:08.841: 0x0110 0x1FBA 0x0919 0x00000000 0x051C 0x0A1A 11111110
18:53:10.882: Newcamd 0: ECM [051C][0919/00000000] Pro (0.026)
18:53:10.882: Newcamd 0: ECM [051C][0919/00000000] not able to decode
18:53:15.382: Newcamd 0: ECM [051C][0919/00000000] Pro (0.020)
18:53:15.382: Newcamd 0: ECM [051C][0919/00000000] not able to decode

oscam.server

[reader]
label=skyit
protocol=mouse
detect=RING
boxID=XXXXXXXXXXX
group=1
device=/dev/ttyS1
caid=0919

oscam.user

[account]
user=pippo
pwd=pippo
group=1
uniq=1
caid=0919
ident=0919:000000
au=skyit

oscam.conf

[global]
nice=-20
WaitForCards=1
logfile=oscam.log
[newcamd]
key=0102030405060708091011121314
port=34500@0919:000000

cardclient.conf
newcamd:localhost:34500:0/0919/ffff: pippo: pippo:0102030405060708091011121314



Qualcuno può aiutarmi?
Grazie

-----UPDATES------------------

Ho modificato il file

cardclient.conf
newcamd:localhost:34500:0/0919/0000: pippo: pippo:0102030405060708091011121314

sostituendo i precedenti FFFF -> 0000 (mi sembrava più coerente....)

ora acamd mi da una partenza migliore...ma ancora qualcosa non va....
credo che manchino le info circa i canali......

acam log

19:02:29.244: ACamd v0.6.1.4
19:02:29.258: MD-API Version 01.02 - 1.06
19:02:29.264: systems: registering CA system Cardclient, pri -15, ident 1000
19:02:29.264: structloaders: registering loader cardclient config
19:02:29.264: cardclients: registering cardclient Newcamd
19:02:29.264: cardclients: registering cardclient Newcamd2
19:02:29.264: cardclients: registering cardclient CCcamN
19:02:29.264: cardclients: registering cardclient Radegast
19:02:29.264: cardclients: registering cardclient Camd35
19:02:29.264: cardclients: registering cardclient EmuBox03
19:02:29.264: cardclients: registering cardclient Gbox
19:02:29.264: cardclients: registering cardclient GboxN
19:02:29.264: cardclients: registering cardclient MboxN
19:02:29.264: structloaders: registering loader smartcard data
19:02:29.264: systems: registering CA system SC-Irdeto, pri -10, ident 1001
19:02:29.264: feature: using feature SMARTCARD
19:02:29.264: registering Irdeto smartcard (id 49726474)
19:02:29.264: systems: registering CA system SC-Seca, pri -10, ident 1002
19:02:29.264: registering Seca smartcard (id 53656361)
19:02:29.264: systems: registering CA system SC-Viaccess, pri -10, ident 1003
19:02:29.264: registering Viaccess smartcard (id 56696173)
19:02:29.264: systems: registering CA system SC-Conax, pri -10, ident 1004
19:02:29.264: registering Conax smartcard (id 436f6e78)
19:02:29.264: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
19:02:29.264: registering Cryptoworks smartcard (id 4372576f)
19:02:29.264: systems: registering CA system SC-Nagra, pri -10, ident 1006
19:02:29.264: registering Nagra smartcard (id 4e616772)
19:02:29.264: systems: registering CA system SC-NDS, pri -10, ident 1007
19:02:29.264: registering NDS smartcard (id 56694732)
19:02:29.278: Monitor listen on port 50224
19:02:29.335: Engine [MD-API]
19:02:29.335: failed open C:\Program Files (x86)\ProgDVB\Plugins\acamd\smartcard.conf: No such file or directory
19:02:29.336: loading cardclient config from C:\Program Files (x86)\ProgDVB\Plugins\acamd\cardclient.conf
19:02:29.336: now using protocol version 525 (cdLen=8)
19:02:29.336: hostname=localhost port=34500 emm=0 emmCaids 0919/0000
19:02:29.336: Newcamd: username=pippo password=pippo key=0102030405060708091011121314 providers=none
19:02:29.336: client 'Newcamd' ready
19:02:29.336: ** registered systems:
19:02:29.336: ** SC-NDS (pri -10)
19:02:29.336: ** SC-Nagra (pri -10)
19:02:29.336: ** SC-Cryptoworks (pri -10)
19:02:29.336: ** SC-Conax (pri -10)
19:02:29.336: ** SC-Viaccess (pri -10)
19:02:29.336: ** SC-Seca (pri -10)
19:02:29.336: ** SC-Irdeto (pri -10)
19:02:29.336: ** Cardclient (pri -15)
19:02:29.336: no smartcard interface defined!
19:02:30.338:
19:02:30.338: Ch: 272 - Fox
19:02:30.338: Programm crc: 15CCA743
19:02:30.339: PMT: ACamd_PMT.txt, search, not found PMT=0110 (AND SID=1FBA)
19:02:30.339: 0x0110 0x1FBA 0x0919 0x00000000 0x051C 0x0A1A 11111110
19:02:30.547: Incomming PackageSize [184]
19:03:07.224:
19:03:07.224: Ch: 263 - Fox +1
19:03:07.224: Programm crc: B3BACB4D
19:03:07.225: PMT: ACamd_PMT.txt, search, not found PMT=0107 (AND SID=0E33)
19:03:07.225: 0x0107 0x0E33 0x0919 0x00000000 0x050C 0x0C00 11111110

questo cos'è ????
ACamd_PMT.txt
Credo che sia questo a mancare!

[zaccaria]

@barbatrukko
prova a cambiare il cardclient.conf con:

newcamd:127.0.0.1:34500:1/0000/0000:oscam:oscam:0102030405060708091011121314:256

[barbatrukko]

@barbatrukko
prova a cambiare il cardclient.conf con:

newcamd:127.0.0.1:34500:1/0000/0000:oscam:oscam:0102030405060708091011121314:256

Ho provato ma niente.
Inoltre credo che ci sia un problema anche sul server

2010/01/10 18:47:01 5684 r02 card detected
2010/01/10 18:47:05 5684 r02 ATR: 3F FF 13 25 03 11 07 05 99 B1 05 D1 69 FF 4B 05 01 71 05 01 49 55 05
2010/01/10 18:47:08 5684 r02 card system not supported
2010/01/10 18:47:08 5684 r02 card initializing error

Non so se i miei settaggi sono giusti:
Infinity -> COM2, Phoneix, 3.579

oscam.server
[reader]
label=skyit
protocol=mouse
detect=RING
boxID=XXXXXXXXXX
group=1
EMMCache= 0,1,2
device=/dev/ttyS1
caid=0919

Qualche idea?

[ezu64]

Ci risiamo........ buio pesto sul cielo italiano

[liquidator87]

mi sa di si...

[deggesim]

Aspettiamo il nuovo rimedio...

[liquidator87]

Fixato nell'ultimissima versione di oscam

Ahah è durato tanto questo tentativo...

[winoni71]

Io ho Acamd, come si usa Oscam (non in card sharing)?
Grazie

[Shjne]

Fixato nell'ultimissima versione di oscam

Ahah è durato tanto questo tentativo...

Un link per prelevarlo????


grazie

[liquidator87]

boh io su linux ho prelevato l'ultima versione tramite svn con il comando

Codice: Seleziona tutto

svn co http://streamboard.gmc.to/svn/oscam/trunk oscam-svn

Sostituire il file "reader-videoguard2.c" con questo

http://streamboard.gmc.to:8001/raw-atta ... eoguard2.c

compilare ed il gioco è fatto

[Shjne]

Ma la versione windows? .. sto googolando ma nn riesco a capire quel'è l'ultima versione...

[liquidator87]

boh penso che dalla rev1596 includeranno il fix che corregge questo problema

[sige]

http://www.zshare.net/download/727348674cb5fe23/

rinominate in oscam.exe e sostituitela a quella vecchia.

Questa versione ha anche supporto monitor.

[nicogatto]

A me non và con questo oscam.exe, ma è x Windows?

[liquidator87]

così sembra

oscam-svn1600-monip.exe: PE32 executable for MS Windows (console) Intel 80386 32-bit